75 RUPP NITRO F/A SEAT COVER & SIDE PAD

PN-#RUSC751 - Seat Cover Only
PN-#RUSC752 - Side Pad Only
PN-#RUSC753 - Seat Cover/Side Pad Combo

Features ...

Click for larger image.

** Please note the our "R" logo snaps are not embossed into the button (as were the originals), but are printed on the button surface.
The placement of the button snaps on RUPP seats is very inconsistant from machine to machine. For this reason, we do not pre-install the button snaps on our seat covers. The only way to ensure a correct match is for you to custom intall them for your individual sled. If you do not have access to an installation tool, we have them available for purchase here. Button Snap Install Tool
The original zipper design for the side pad, is no longer available from the OEM. As a result, you will need to install the matching zipper half on your original side pad (supplied with seat cover). If you have one of our 75 RUPP Nitro Reproduction Side Pads, this is not an issue as the two are designed with the same type of zipper.
It is quite common, on the 75 Nitro, to find that your original seat foam has shrunk. They usually shrink in length more so than width. Flip your seat cushion upside down. It should measure 38" in length. In order to get a good fit with your new seat cover, you may need to add a piece of foam to the front of your seat cushion to maintain the correct length.
Seat foam is not included with seat (It is, however, included with the side pad). Unfortunately, we do not have seat foams for the 75 F/A available for purchase at this time.